Live slideshows
Wedding Slideshow Projector Setup Guide
Set up a live wedding photo slideshow on a projector or TV and display guest uploads as they arrive. This guide covers the connections, the settings and the decisions that most guides skip.
Showing the collection on the room's screen while the event runs.

A live photo slideshow at a wedding reception is one of those features that sounds straightforward until you are standing in the venue at four in the afternoon with a projector that the venue hired in and a laptop that is not talking to it. The setup itself is not complicated, but it has four distinct layers: the hardware connection, the display software, the photo collection and the network that ties them together. Each layer has its own way of going wrong, and they tend to go wrong in combination on the day.
This guide works through each layer in order, covering the decisions that matter before you arrive at the venue and the checks you can run when you get there.
The hardware: projector, screen, TV, or all three
What appears on the wall is the last step. The decisions before it determine whether the last step works.
Display options at a wedding venue
- A venue projector
- Many wedding venues have a built-in projector for the ceremony or speeches. These are usually controlled by the venue's AV system, which may or may not have an input you can use. Ask early: some venues only let the AV team operate the projector, and some AV teams will want to know exactly what signal you are sending before they agree.
- A hired projector
- If you are bringing your own projector, check the input it has — HDMI is the most common, but older projectors use VGA, and some have both. Bring adapters for both if your laptop has USB-C. A hired projector for a reception usually comes with a screen; confirm the screen size relative to the room.
- A large TV
- Many reception venues have large screens in the dining room or bar area. These are often better than projectors for a slideshow because the image is brighter and more consistent, they are already mounted at a height guests can see from their seats, and they usually have an HDMI port at the back. Find the port before the day and confirm the room is dim enough that the screen is readable.
- Multiple screens
- A large reception might use a projector for the main wall and a TV near the bar or in the reception area. That requires either a second laptop running the same slideshow, or a video signal splitter that feeds both screens from one source. Wireless display solutions are also available, but they add a network dependency.
The software: what runs the slideshow
A live photo slideshow — one that updates as guests upload — requires software that knows where the photographs are coming from and how to display new arrivals automatically. That is a different requirement from a slideshow app that plays a folder of pre-loaded photographs.
The event gallery's slideshow view
Candid Photos includes a slideshow mode that opens in a full-screen browser window and auto-refreshes as new photographs arrive from the guest upload page. You open it on the laptop connected to the projector or TV, and it handles the display and the refresh automatically. No separate app is needed, and the photographs that appear are exactly the ones your guests are uploading in real time.
Full-screen browser mode
Open the slideshow view in the browser, then press F11 (on Windows) or the full-screen button (on Mac) to remove the browser controls. The audience sees photographs, not a browser address bar. Some laptops need a function-key combination instead of F11; test this before the day.
Display timeout settings
If the laptop's screen is set to turn off after a few minutes of inactivity, the slideshow will go dark during a long dinner. Change the display timeout in the laptop's power settings to 'never' before the reception, and plug the laptop in so the battery is not the reason something stops.
The refresh rate
The slideshow view refreshes to show new arrivals. The interval is set by the platform, not by you. A live slideshow during the reception will show photographs that guests upload during the meal, so the display changes as the evening progresses.
The network: the part that causes the most problems
A live slideshow depends on two separate network tasks: the laptop running the slideshow must be able to reach the platform to fetch new photographs, and the guests uploading photographs must be able to reach the same platform to send them. Those are independent connections, and both need to work.
Network checks for the day
Find out what the venue's Wi-Fi is called
Most venues have a guest network. Get the name and password before the day, and test whether the laptop can connect and reach the internet from the position where the projector is set up. Some venues have dead spots, and the AV corner is sometimes one of them.
Have a mobile data backup
If the venue Wi-Fi is unreliable, the laptop running the slideshow can use a mobile hotspot. Keep the hotspot device separate from your phone if possible, so a call mid-reception does not disconnect the slideshow. A cheap mobile data SIM on a small device is a reasonable backup.
Test the guest upload network separately
Guests will use the venue Wi-Fi or their own mobile data to upload. You cannot control which one they use, but you can check that the upload page loads from the venue before the reception begins. Load it on your phone in the dining room and confirm the QR code works.
Check the display resolution
Before the reception, connect the laptop to the projector or TV and confirm the resolution is set correctly. A projector expecting 1080p that receives a 4K signal may display nothing, or may display a cropped image. Set the laptop to match the projector's native resolution.
Test everything the day before, not the morning of
A projector connection that works in the venue on Friday afternoon will work on Saturday evening. A projector connection that you are figuring out at six on Saturday evening may not. Venue AV setups, especially in older buildings, have quirks that only reveal themselves when you are under pressure. The earlier you test, the more time you have to find a workaround.
What to show, and in what order
A slideshow that shows every photograph in upload order will show the photographs from the ceremony during the dinner, and the photographs from the dinner during the first dance — which is fine, because guests enjoy seeing their own photographs appear. But there are some decisions worth making before the day.
Slideshow content decisions
- Decide whether to show all photographs as they arrive, or only the ones you have approved. Approval is a setting on the collection. With approval on, you are the gatekeeper; without it, every uploaded photograph appears on the screen. For a large reception with a mixed age range and an open bar, approval is worth considering.
- Decide whether the slideshow shows only the guest photographs, or whether it also includes pre-loaded photographs from the ceremony or engagement shoot. Some platforms let you pre-load photographs that appear alongside the guest uploads.
- Consider whether anyone is managing the approval queue during the reception. If approval is on and nobody is watching the queue, photographs may pile up and not appear on screen. Assign someone — a family member, the photographer's assistant — to watch the queue and approve during the dinner.
- Tell guests the slideshow exists. A QR code on the table is invitation enough for most people to upload, but a mention from the person giving the welcome — 'we have a live slideshow on the screen, scan your table card to add your photographs' — increases participation significantly.
Questions about live slideshow setup
Do I need a special app to run the slideshow on the projector?
No. The slideshow runs in a browser window on the laptop connected to the projector. Open the slideshow view on the event collection, make the browser full-screen, and it displays automatically. No separate app or software is required.
What if the venue Wi-Fi cuts out during the reception?
The slideshow pauses on the last photograph it loaded and resumes when the connection returns. It will not show an error screen unless the browser tab is refreshed manually. Have a mobile hotspot available as a backup for the laptop running the slideshow.
Can I show photographs on a TV and a projector at the same time?
Yes, with either a video signal splitter connected to both displays, or a second laptop running the same slideshow view simultaneously. Wireless display options also exist but add a network dependency. Test whichever approach you use before the day.
How long does it take for a guest's photograph to appear on screen?
It depends on the upload speed at the venue and the refresh interval of the slideshow. Under good conditions, a photograph uploaded during the main course appears on screen within a minute or two. That is part of what makes the live slideshow interesting for guests.
Does the laptop need to stay connected to the internet all evening?
Yes. The slideshow fetches new photographs as guests upload them, which requires an internet connection throughout. If you are using venue Wi-Fi, make sure the laptop does not fall asleep or disconnect from the network during the reception.
Set up a live slideshow for your wedding reception
Create a guest photo collection and use the slideshow view to display new arrivals on your projector or TV as the evening runs.
Slideshows and room displays
Put one link on the tables and let everyone contribute.
Create a collection, print the table stands, and the photographs your guests took are waiting for you the morning after. Guests never install anything and never make an account.